Related Cases
Solution Catalog
Project Information
According to the requirements, the configuration of the energy storage system is 25MW/50MWh. The specific configurations for using Maxbo container product parameters are as follows.
Battery information
Battery cell specification: LFP battery cell, 3.2V, 280Ah, single capacity is 0.896 kWh.
l Pack specifications: 153.6V/280Ah, cell connection type 1P48S, the capacity of single Pack is 48 x 0.896 = 43.008kWh.
Solution Configuration
8pcs battery pack per battery rack: 8 battery pack serially connected plus 1 High Voltage Box; single capacity of battery rack is 8 x 43.008 = 344 kWh.
10 set battery Rack parallel connected in the battery container, total capacity is 10 x 344KWh = 3440KWh, which are integrated in one 20ft battery container.
There are total 15 Container connect to 15*1.725MW PCS
The project total capacity of BESS is 51.609KWh.
Battery System
Battery Cell
Hoypower Battery Storage System rely on LFP chemistry to provide stable, industry leading safety and high-power performance. Each cell is 3.2V 280V, the specification as follows.
Battery Module
Modules are formed by configuring 48pcs LFP cells in series connection. Battery module is connected with a BMU at front. Each rack contains 8 modules and 1 BPU.
Battery Module
Each battery rack contains 8 battery module and 1 BPU, Racks are connected in parallel and paired with a system BMS. All wire connection are placed on the front side of the rack for easy installation and maintenance
BMS
BMS composition
BESS implement a complete, multilevel battery management system (BMS) for system monitoring and control. Each battery management system including:
l Module Battery management unit (BMU)
l Rack Battery Management controlling System (BCU)
l System-level BMS (BAMS)
BMU is designed to detect voltage, temperature, and execute cell balance functions for cells. BCU can manage all module BMS units and detects total voltage, current, and executes protection functions by switching DC-contactor. Finally, a system-level BMS (BAMS) manages rack BMS units and communicates with PCS or EMS. The table below outlines BMS units of the system.
Fire Suppress system
Each container has a separated and independent fire suppression system. According to the working principle of energy storage system and other related standard, Detectors, fire control panel and fire extinguisher are installed in each container. It can constantly monitor the temperature, combustible gas and smoke. When the fire event is detected, control panel will release the fire extinguisher automatically and send a signal to BMS or EMS.
FSS topological graph
Liquid Cooling System
One container is composed of a liquid cooling unit and its liquid cooling pipeline system. The control system automatically controls the work of liquid cooling system according to battery temperature.
Cooling liquid powered by the pump circulate inside the battery modules and take the heat from batteries. The hot liquid will circle back to a heat exchanging tank.
Inside the heat exchange tank, the refrigerant will absorb the heat from hot liquid and cool down the liquid.
Advantage of Liquid Cooling system l Higher cooling capacity
l Better temperature uniformity
l Lower noise emission
BCP & AUX Cabinet
BCP contains following components
The main function of the BCP is to combine multiple racks of batteries to one DC bus with a disconnecting switch, then connect to the DC input of PCS with a necessary protections. With fuses switches , SPDs , the BCP serves as a key part of battery protections
Aux cabinet contains following components
With input connections , switches , connectors , UPS , and auxiliary power connection to the auxiliary loads ( BMS , Chiller , FSS , etc . ) , acting as an auxiliary power panel to power internal equipment
Through the connections to the BMS , Chiller , FSS , and other internal equipment, then combine them to the System Controller for control integration
Product Specification Features
PCS technical specifications
Container Layout
1. Chiller
2. Fire extinguisher
3. BCP&Aux cabinet
4. Battery rack