Related Cases

Solution Catalog

Customer needs

The factory is an ice making plant. It consumes a lot of electricity both during the day and at night, so the electricity bill is very high. The customer wanted to reduce costs by means of a photovoltaic system. In order to guarantee power supply at night, the customer wants the battery storage capacity to be as large as possible.

2.2MW / 2.88MWh off-grid solar energy system

Considering the customer’s roof installation space and electricity consumption and other needs we finally gave a proposal of 2.2MWp PV panels, the daily power generation is estimated to be 8.8MWh (because the customer’s local lighting conditions are better, so the power generation efficiency is higher and the total power generation in a single day is better). . Of this 8.8MWh, 6MW will be used for the factory’s production for the day and the extra 2.8MW will be stored in batteries for night cooling. The customer is very happy with this solution.

* The circuit connection diagrams for higher power are protected and you can contact our team if you want to get your own circuit connection diagram. After discussing your proposal, we will provide you with a free wiring diagram and roof placement plan to suit your needs.

Roof placement diagram

The following diagram shows the placement of this project, the client used a roof mount and did not require an angle. We have maximised the utilisation of the roof and left access for later servicing as shown below.

Let’s Make Things Happen

* Please fill in as fully as possible so that we can provide a more accurate proposal.

Add notice about your Privacy Policy here.

Let’s Make Things Happen

The Maxbo team of sales consultants will continue to enrich our own expertise and experience to empower the development of sustainable energy with rigor.

Maxbo CEO

You will need to provide: 1. the amount of electricity used. 2. the type and power of the load. 3. the electricity consumption habits (daytime/nighttime consumption). 4. the need to store electricity. 5. the need to feed electricity to the mains. 6. drawings or address of the installation site. 7. other special requirements

We can provide you with a quotation, a specification for all products, a circuit connection diagram and a diagram of the installation and placement of the PV panels. Any other requirements and adjustments needed can be discussed with our team.

We can meet the needs of most scenarios, whether your application is for domestic, commercial and industrial use, in remote areas, or for grid-level energy storage, we have experienced colleagues to design and deliver the right solution.

* Please fill in as fully as possible so that we can provide a more accurate proposal.

Add notice about your Privacy Policy here.