Related Cases

Solution Catalog

Customer needs

This is a user from Jamaica. He has provided us with some important information.
” Hello, Please can send me an offer for a 25kW hybrid PV system, with 20kW lithium battery storage, 3 phase 230/400volt. Shipping and duty included, ***** “

25kW hybrid solar energy system

Based on the above requirements of the client, we have customised a hybrid PV system with a daily generation capacity of 78.72kWh and a battery storage capacity of 19.2kWh.

The following is a list of the products we supplied:

  • 410W solar panel * 60pcs (size: 1940mm*1048mm*35mm)

  • 12kW hybrid Inverter * 1pc (230/400VAC, 3L+N+Pe, sine wave)

  • 9.6kWh lithium battery * 2pc (48V 200Ah)

  • Bracket for 60pcs solar panels (rooftop mounting system)

  • Cable & connecter

Circuit connection diagram

This circuit connection diagram below shows in detail how the connections are made in different positions and will solve most of the problems during installation. If there are any other questions or problems that need to be solved you can contact our after sales team to solve them for you.

Roof placement diagram

This system requires a total of 60 photovoltaic panels to be placed. Once we have the customer’s roof and the corresponding dimensions, we can first calculate that the customer’s roof is perfectly adequate. We then needed to design the most reasonable solution. The following is the final layout we designed. The roof has been placed in a way that maximises the light conditions, makes use of the three sides of the roof and avoids obstacles and trees. The existing roof has been used to maximise the efficiency of the electricity generated.

Let’s Make Things Happen

* Please fill in as fully as possible so that we can provide a more accurate proposal.

Add notice about your Privacy Policy here.

Let’s Make Things Happen

The Maxbo team of sales consultants will continue to enrich our own expertise and experience to empower the development of sustainable energy with rigor.


Maxbo CEO

You will need to provide: 1. the amount of electricity used. 2. the type and power of the load. 3. the electricity consumption habits (daytime/nighttime consumption). 4. the need to store electricity. 5. the need to feed electricity to the mains. 6. drawings or address of the installation site. 7. other special requirements

We can provide you with a quotation, a specification for all products, a circuit connection diagram and a diagram of the installation and placement of the PV panels. Any other requirements and adjustments needed can be discussed with our team.

We can meet the needs of most scenarios, whether your application is for domestic, commercial and industrial use, in remote areas, or for grid-level energy storage, we have experienced colleagues to design and deliver the right solution.

* Please fill in as fully as possible so that we can provide a more accurate proposal.

Add notice about your Privacy Policy here.